Professional Diagnostic Tool Key Programmer ICH331

1. Input ID: 3417
2. Press Set button, and then a button.
3. Press key to show: COUNTER: 1 (expressed as a number of launches can be arbitrary choice 1-9 times)
FLOW: ON-UP (open the door, up key)
4. Press stop button, return 0.
5. Press Manual button.
6. Press key five times, indicating: # 2262 T24 000, 000, 001, 000
7. Press manual button once, the cursor in the T24 T-word flash.
8. Press key to adjust matching resistor, the machine factory default for the 2.4M ohm matching resistor, and now basically is not used in mainland China (mainland generally 4.7M ohm, and the case of other matching resistor can be self-tuning, down to the lower keys are matched resistance)
9. Press manual button three times, the cursor moved to the lower right corner of the screen, this time choose to scan individual password.
10. Press 7 key to scan the first 8 code, (that is, master password, scan time to 60 minutes or so)
11. Press 8 key scan 4 yards, (that is, key-bit code, scan time to 10 minutes or so)
12. Press 9 key is the full code scan (full scan to be 2 hours or so)
13. To any of the above mentioned 7, 8, 9 pressed a button when the machine immediately began scanning motion, please wait patiently sweeping response to a time when the receiver, (such as soon as the receiver ring, lights flash look, receiver inside the following Electric jump about, vibration it), immediately press the stop button once, do not press the second, according to the second is the full return 0, the scanned data will not remember.
14. Press into key, then keys 5 keys to a any one key, the existence of just sweep to the yards you want to key on the machine is called three times, says it has just scanned the password stored keys to a button on the key five
15. If you press the stop button too late can be inverted back to the receiver and then the reaction time is to find the password. (Preferably by sweeping out the password to write it down for reference)
16. Press stop button return 0.
17. Press Remove button.
18. Button 1 to button 5 are adjustable to any one key out of the remote control just saved passwords, this time the scanner is quite a remote control.
19. If the Division I all-English tie in remote replicator, you can store the remote control device transferred to a remote control up, method is to put the whole front of the scanner in Chinese remote control sensor area on the receiver replicator

Function
1. Boot type ID: 3417
2. Press accept button, display READ
3. The remote sensing area on any one pressing the remote control button, the receiver after the show after the host calls out the remote control of the internal code data, please check the remote control if you can not show whether the normal use
4. Press the stop key to exit.

Shipment:

1). Items will be sent to all the countries over the world.
2). This package will be sent by Hongkong Airmail Post, EMS, UPS or DHL.
3). Items will be checked carefully before sent out.
4). The shipping time is about 2 to 5 days via UPS DHL and EMS, 15-30 days via HK POST AIR to Worldwide.

Note: We hope it arrive on time but since this is an international delivery, shipping time will be highly depended on the courier company and local customs/duties. Thank you for your understanding.

Warranty & Return:
1). All products have been checked and packaged in good condition before dispatch.
2). In case the item is defective, please inform us within 7days of receipt, we will replace a new one. No Refunds are offered.
3). Buyers have to pay for the return cost and we will pay the cost for resend.
4). 12 months Manufacturer's limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.

Contact Us:
24hours 7 days online service And if nobody answer you online in time sometimes, do not worry. Leave us a message or write down your desires, we will contact you as soon as possible.